Table of Contents
Advertisement
5
5.6
Polling reception
The polling reception function is used to poll documents from remote fax
machines as long as the documents have been placed either in the feeder
or the memory of the remote fax machine.
In various steps you will be asked to enter an F CODE. There are three
different F CODE settings:
F CODE SEP (selective polling TX/RX)
Set this F CODE if you are preparing a document for confidential
polling. Only recipients that have the same F CODE stored in their
machine can poll the document. If a partner has stored a document
using SEP, you must use the F CODE SEP to poll the document.
F CODE SUB
Use this F CODE to address sub-addresses in a server net work
directly.
F CODE password (PWD)
If you wish to protect your mailbox with a second lock, you can assign
an additional password. Enter the desired password as a 4 digit
number.
1
Press [FUNCTION] and [7] on
the numeric keypad.
2
Enter the desired number using
the numeric keypad, one-touch
keys or speed dial and press
[V/PIN CODE].
Press [YES] to continue from point 5 without entering a polling ID
and a password. Confirm the fax number by pressing [YES].
3
Enter the polling ID of the
recipient using the numeric
keypad and press [YES].
Up to 20 characters can be
entered.
5-8
7 POLLING RX
NO. 001=123456_
OK=YES
(SEP=
POLLING ID =1234
OK=YES
(DEL=NO)
Minoltafax 2800/3800
Reception
t
)
Advertisement
Table of Contents
Troubleshooting
