Chapter 3: Testing Performance
To test time measurement accuracy
µ
µ
µ
µ
If the test fails
Before troubleshooting the oscilloscope, be sure to verify your test setup and the waveform shape, then
repeat the procedure. Try the measurement on different channels. If you still encounter problems, there
may be a problem with the acquisition board. You may need to adjust the pulse overshoot response. See
chapter 4 for adjustment information on the pulse response. See chapter 5 for troubleshooting information.
±
±
±
±
µ ±
µ ±
µ ±
µ ±
µ
µ
µ
µ
µ