2
Offset Accuracy*
dc Voltage Measurement
2
Accuracy*
AutoProbe Interface
Horizontal
Main Time Base Range
Horizontal Position Range
Delayed Sweep Range
Delayed Sweep Delay Range
Resolution
Timebase Accuracy
∆t Accuracy*
± (1.00% of channel offset + 1% of full scale) at full-resolution channel scale.
Dual Cursor
Single Cursor
AutoProbe is an intelligent communication and power link between compatible
probes and Infiniium scopes. AutoProbe completely configures the scope for the
attached probe. For instance, it identifies the probe type and sets up the proper input
impedance, attenuation ratio, probe power and offset range, as needed.
100 ps/div to 20 s/div
pre-trigger
post-trigger
1 ps/div to current main time base setting.
Within main time base acquisition record.
2 ps
70 ppm (.007%)
4
Real Time mode
Equivalent Time mode
Chapter 1: General Information
Specifications & characteristics
±[(dc gain accuracy)+(resolution)]
±[(dc gain accuracy)
+(offset accuracy)+(resolution/2)]
0 to -1 s or one full screen width,
whichever is larger.
0 to 1 s or one full screen width,
whichever is larger.
±[(.007%)(∆t)+(0.2)(sample period)]
±[(.007%)(∆t)+(full scale/
(2 × memory depth)) + 30 ps]
(Example: for ≥ 16 avgs, 9 ns signal,
1 ns/div, 1 channel, then accuracy =
±[(.007%)(9 ns)+(10 ns/(2 × 65,536)) + 30
ps] = 31 ps)