Agilent Technologies XX3625 Service Manual page 114

Chapter 5: Troubleshooting
To configure the motherboard jumpers and set up the BIOS
Table 5-7 Series 727 System Configuration Settings
Configuration Item
Load Optimal Defaults
Peripheral Setup (OnBoard Primary/Secondary IDE)
Detect IDE Utility (Hard drive Primary Master)
Standard Setup—Date/Time
Standard Setup—Floppy Drive A
Advanced Setup—System Keyboard
Advanced Setup—External Cache
Power Management/APM*
Hard Disk Power Down Mode*
Hard Disk Time Out (minute)*
* These configurations are only for instruments with 64 Mb or more of RAM.
Setting
YES
Primary
Data
Enter current values
1.44 MB, 3-1/2
Absent
Disabled
Enabled
Suspend
15 min