Accessing Site Survey Mode - ShoreTel 930D User Manual

Troubleshooting
3

Accessing Site Survey Mode

1. Press and hold the Menu button on the IP930D handset for more than 3 seconds.
The Settings menu appears.
2. Enter *service* (or *7378423*).
3. Turn on the site survey mode from the menu.
An overlay displays the RPN of the base or repeater the handset is connected to (left-most) and
any other base or repeaters it can see. Also shown is the RSSI (received signal strength indicator)
for the base or repeater to which the handset is connected.
Note
The RPN is a unique identifier assigned to each base and repeater in the system. RPN
assignments are included in the Installation Summary generated by the ShoreTel IP930D
Configuration Tool during installation.
4. Press End/Power to exit the Settings menu.
24 Base Station and Repeater User Guide
Accessing Site Survey Mode
ShoreTel IP Phone 930D