Powering The Repeater; Connecting The Ac Adapter - ShoreTel 930D User Manual

Using the Repeater Unit
2

Powering the Repeater

Repeaters require one of these for power:
A non-switched AC outlet (100-240V 50/60hz) within 2 meters of the repeater.

A PoE wire adapter and Linksys POES5 5-volt PoE splitter for use with a powered Ethernet

connection.

Connecting the AC Adapter

Follow these steps:
1. Choose the AC power plug that matches the AC outlet in your country or region.
2. Insert the AC power plug into the AC adapter; slide until it locks in place.
3. Plug the AC adapter cable into the modular adapter jack on the rear of the repeater.
If the location where you would like to install in the repeater does not have a nearby AC outlet, use a
PoE wire adapter instead of AC power. See
17.
W
ARNING
Do not use extension cables to lengthen the AC adapter cable; doing so can cause the repeater to
malfunction.
16 Base Station and Repeater User Guide
!
Using a PoE Wire Adapter to Power the Repeater

Powering the Repeater

on page
ShoreTel IP Phone 930D