Using the Repeater Unit
2
Using a PoE Wire Adapter to Power the Repeater
If you need to position the repeater in a location that does not provide a nearby AC outlet, you can use
a PoE wire adapter and a Linksys POES5 5-volt PoE splitter with a powered Ethernet connection to
power the repeater. Use the Linksys splitter to provide power only; do not use the Ethernet cable
provided by the splitter. See the illustration below.
Splitter Ethernet
cable (do not use)
Linksys splitter
ShoreTel IP Phone 930D
Using a PoE Wire Adapter to Power the Repeater
Powered Ethernet cable plugs in here
Base Station and Repeater User Guide
PoE wire adapter
Repeater
17