Chapter 5
f
When you have finished, press
Stop/Exit.
Setting your changes as a
new default
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Scan Size you use
most often by setting them as default. These
settings will stay until you change them again.
a
Press
(Fax).
b
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press
(Fax).
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
36
Sending a fax manually
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
5
a
Press
b
Load your document.
c
To listen for a dial tone pick up the
handset of an external telephone.
d
Dial the fax number.
e
When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass press
1 on the machine to send a fax.
f
Replace the handset.
Out of Memory message
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Mono Start to send
5
the pages scanned so far, or to press
Stop/Exit to cancel the operation.
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 34.)
(Fax).
5
5