Dial Tone Detection - Brother MFC-465CN User Manual

f
Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3).
g
Push the paper tray firmly back into the
machine.
Note
Make sure you pull out the paper support
until it clicks.
124

Dial Tone detection

When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the factory No Detection setting.
a
Press Menu.
b
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose Dial Tone.
Press OK.
d
Press a or b to choose Detection or
No Detection.
Press OK.
e
Press Stop/Exit.
B