Loading Photo Paper - Brother MFC-465CN User Manual

b
Put the envelopes or post cards into the
paper tray with the address side down
and the leading edge (top of the
envelopes) in first . Slide the paper side
guides (1) and paper length guide (2) to
fit the size of the envelopes or post
cards.
2
If you have problems when printing on
envelopes, try the following suggestions:
a
Open the envelope flap.
b
Make sure the open flap is either to the
side of the envelope or to the back edge
of the envelope when printing.
c
Adjust the size and margin in your
application.

Loading photo paper

Use the photo paper tray, which has been
assembled on the top of the output paper tray
cover, to print on photo 10×15cm and photo L
size paper. When you use the photo paper
tray, you do not have to take out the paper
that is in the tray beneath it.
1
a
Press the photo paper tray release
button with your left thumb and push the
photo paper tray backward until it clicks
into the photo printing position.
1
2
1 Photo Paper Tray
b
Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
Loading documents and paper
1
2
2
2
17