Entering Photocapture Mode; Print Images; View Photo(S) - Brother MFC-465CN User Manual

Entering PhotoCapture mode

After you insert the memory card or USB
Flash memory drive, press the
(PhotoCapture) key to illuminate it in
green and display the PhotoCapture options
on the LCD.
The LCD shows:
PHOTO

View Photo(s)

Print Index
Print Photos
Photo Effects
Select & Press
Press a or b to scroll through the
PhotoCapture key options.
View Photo(s) (See page 81.)
Print Index (See page 82.)
Print Photos (See page 82.)
Photo Effects (See page 83.)
Search by Date (See page 85.)
Print All Photos (See page 86.)
Slide show (See page 86.)
Trimming (See page 87.)
Note
If your digital camera supports DPOF
printing, see DPOF printing on page 87.
When the option you want is highlighted,
press OK.
Printing photos from a memory card or USB Flash memory drive
13
OK

Print Images

View Photo(s)
You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
a
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (PhotoCapture).
b
Press a or b to choose
View Photo(s).
Press OK.
c
Press d or c to choose your photo.
Note
Instead of scrolling through your photos, you
can use the dial pad to enter the number of
the image from the index page. (See Print
Index (Thumbnails) on page 82.)
d
Press a or b to increase or decrease the
number of copies.
e
Repeat step c and step d until you
have chosen all the photos.
Note
Press Clear/Back to go back to the
previous level.
f
After you have chosen all the photos, do
one of the following:
Press OK and change the print
settings. (See page 88.)
If you do not want to change any
settings, press Colour Start to print.
13
13
13
81