Section Ii Fax; Sending A Fax; Entering Fax Mode; Faxing From The Adf - Brother MFC-465CN User Manual

5

Sending a fax

Entering Fax mode

When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in green.
The LCD shows:
FAX
Fax Resolution
Contrast
Speed Dial
Outgoing Call
Press
Fax Start
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
Fax Resolution (See page 33.)
Contrast (See page 33.)
Speed Dial (See page 50.)
Outgoing Call (See page 51.)
Caller ID hist. (See page 51.)
Broadcasting (See page 32.)
Delayed Fax (See page 35.)
Batch TX (See page 35.)
Real Time TX (See page 34.)
Polled TX (See page 68.)
Polling RX (See page 66.)
Overseas Mode (See page 35.)
Scan Size (See page 31.)
Set New Default (See page 36.)
Factory Reset (See page 36.)
30
5
09012345689
Standard
Auto
When the option you want is highlighted,
press OK.

Faxing from the ADF

a
Press (Fax).
b
Put the document face down in the ADF.
(See Using the ADF on page 9)
c
Enter the fax number using the dial pad,
Speed Dial or Search.
d
Press Mono Start or Colour Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full it will be sent in real time.
Faxing from the scanner
glass
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.
You cannot send multiple pages for colour
faxes.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
a
Press (Fax).
b
Load your document face down on the
scanner glass. (See Using the scanner
glass on page 9)
5
5
5