Changing Fax Resolution; Setting Your Changes As A New Default; Restoring Fax Settings To The Factory Default - Brother MFC-J825DW Advanced User's Manual

Chapter 3

Changing fax resolution

The quality of a fax can be improved by
changing the fax resolution.
a
Press (FAX).
b
Press d or c to display
Fax Resolution.
c
Press Fax Resolution.
d
Press the resolution you want.
Note
You can choose four different resolution
settings for monochrome faxes and two
for color.
Monochrome
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or artwork
S.Fine
and transmits slower than Fine
resolution.
Use when the document has
Photo
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
Color
Suitable for most typed
Standard
documents.
Use when the document is a
Fine
photograph. The transmission
time is slower than Standard
resolution.
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
6
Setting your changes as a
3
new default
You can save the settings for the fax options
you use most often by setting them as default,
such as Fax Resolution, Contrast,
Glass ScanSize, Preview and
Real Time TX. These settings will stay until
you change them again.
a
Press
b
Press d or c to choose the menu option
that you want to change. Press your new
option.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
d or c to display Set New Default.
d
Press Set New Default.
e
Press Yes.
f
Press Stop/Exit.
Restoring fax settings to the
factory default
You can restore all the fax settings you have
changed to the factory default. These settings
will stay until you change them again.
a
Press
b
Press d or c to display
Factory Reset.
c
Press Factory Reset.
d
Press Yes.
e
Press Stop/Exit.
(FAX).
(FAX).
3
3