Drive Bay Installation/Removal; Accessing The Drive Bays - Supero SUPERSERVER 5018D-MF User Manual

S S
UPER ERVER 5018D-MF User's Manual
Note: different motherboard may be shown than that in the 5018D-MF
6-4

Drive Bay Installation/Removal

Accessing the Drive Bays

DVD-ROM/Serial ATA Drives: For installing or removing the DVD-ROM or SATA
drive, you will need to gain access to the inside of the server by removing the top
cover of the chassis. Note: The DVD drive is optional and does not come pre-
installed in the system. Only a "slim" DVD-ROM will fi t in the 5018D-MF.
Accessing the Inside of the System
1. Power down the system and remove the AC power cord.
2. Grasp the two handles on either side and pull the unit straight out until it
locks (you will hear a "click").
3. Next, remove the screws from the lips on either side of the cover then de-
press the two buttons on the cover to release it.
4. Push the cover away from you then lift it from the chassis to gain full access
to the inside of the server.
Figure 6-2. System Cooling Fans
6-4