Table of Contents
Advertisement
S
S
UPER
ERVER 5018D-MF User's Manual
Fan Headers
The X10SLL-F has five fan headers
(Fan1 ~ Fan4 and FanA). These are 4-pin
fan headers and work with IPMI to moni-
tor and change fan speed as required
based on the system temperature. Refer
to the table on the right for pin defi nitions.
Chassis Intrusion
A Chassis Intrusion header is located at
JL1 on the motherboard. Attach the ap-
propriate cable from the chassis to inform
you of a chassis intrusion when the chas-
sis is opened.
Power LED/Speaker
On the JD1 header, pins 1-3 are used for
power LED indication and pins 4-7 are for
the speaker. See the tables on the right
for pin defi nitions. Please note that the
speaker connector pins (4-7) are used
with an external speaker. If you wish to
use the onboard speaker, you should
close pins 6-7 with a jumper.
Internal Buzzer (SP1)
The Internal Buzzer (SP1) can be used
to provide audible indications for various
beep codes. See the table on the right for
pin defi nitions.
Fan Header
Pin Defi nitions
Pin#
Defi nition
1
Ground (Black)
2
+12V (Red)
3
Tachometer
4
PWM_Control
Chassis Intrusion
Pin Defi nitions
Pin#
Defi nition
1
Intrusion Input
2
Ground
PWR LED Connector
Pin Defi nitions
Pin Setting
Pin 1
Anode (+)
Pin2
Cathode (-)
Pin3
Cathode (-)
Speaker Connector
Pin Settings
Pin Setting
Pins 4-7
External Speaker
Pins 6-7
Internal Speaker
Internal Buzzer
Pin Defi nition
Pin#
Pin 1
Pos. (+)
Pin 2
Neg. (-)
5-18
Defi nition
Defi nition
Defi nitions
Beep In
Alarm
Speaker
Advertisement
Table of Contents
