Supero SUPERSERVER 5018D-MF User Manual page 69

Management Engine (ME) Recovery
Use Jumper JPME1 to select ME
Firmware Recovery mode, which will
limit resource allocation for essential
system operation only in order to
maintain normal power operation and
management. In the single operation
mode, online upgrade will be available
via Recovery mode. See the table on
the right for jumper settings.
Manufacturer Mode Select
Close Pin 2 and Pin 3 of Jumper JPME2
to bypass SPI fl ash security and force
the system to operate in the Manufac-
turer mode, allowing the user to fl ash
the system fi rmware from a host server
for system setting modifi cations. See
the table on the right for jumper settings.
Chapter 5: Advanced Motherboard Setup
ME Recovery
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
ME Mode Select
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
5-23
Defi nition
Normal (Default)
ME Recovery
Defi nition
Normal (Default)
Manufacture Mode