Table of Contents
Advertisement
S
S
UPER
ERVER 5018D-MF User's Manual
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller)
LED connection for LAN port 1 is located
on pins 11 and 12 of JF1, and the LED
connection for LAN Port 2 is on pins 9
and 10. Attach NIC LED cables to NIC1
LED and NIC2 LED to display network
activities for LAN 1 and LAN2. Refer to
the table on the right for pin defi nitions.
Overheat (OH)/Fan Fail/Front UID
LED
Connect an LED cable to the Front UID
and OH/Fan Fail connections on pins 7
and 8 of JF1 to display UID (Unit ID) sig-
nals or to provide advanced warnings for
chassis overheat/fan failure. Refer to the
table on the right for pin defi nitions.
Power Fail LED
The Power Fail LED connection is located
on pins 5 and 6 of JF1. Refer to the table
on the right for pin defi nitions.
Reset Button
The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to a the
hardware Reset Button on the computer
case. Refer to the table on the right for
pin defi nitions.
Serial Ports
The COM1 port is located on the I/O
backpanel. COM2 is a header located
on the the motherboard. See the table
on the right for pin defi nitions.
LAN1/LAN2 LED
Pin Defi nitions (JF1)
Pin#
Defi nition
9/11
10/12
OH/Fan Fail LED
Pin Defi nitions (JF1)
Pin#
Defi nition
7
Vcc/Blue UID LED
8
OH/Fan Fail LED
OH/Fan Fail Indicator Status
State
Defi nition
Off
On
Flashing
PWR Fail LED
Pin Defi nitions (JF1)
Pin#
Defi nition
5
3.3V
6
PWR Supply Fail
Reset Button
Pin Defi nitions (JF1)
Pin#
3
4
Serial Port Pin Defi nitions
(COM1/COM2)
Pin #
Defi nition
1
CDC
2
RXD
3
TXD
4
DTR
5
Ground
5-16
3.3V Stby
Signal
Normal
Overheat
Fan Fail
Defi nition
Reset
Ground
Pin #
Defi nition
6
DSR
7
RTS
8
CTS
9
RI
10
NC
Advertisement
Table of Contents
