Adding Pci Cards - Supero SUPERSERVER 5018D-MF User Manual

S S
UPER ERVER 5018D-MF User's Manual
5-6

Adding PCI Cards

PCI Expansion Slots
One riser card is used to support a PCI expansion (add-on) card in the system.
The SC512F chassis can accommodate one standard size (full height full length)
PCI expansion card. When viewed from the chassis front, the card installs to the
left rear of the system.
PCI Card Installation
Before installing a PCI add-on card, make sure it is supported by the riser card.
Begin by releasing the locking tab that corresponds to the slot you wish to populate.
Insert the expansion card into the riser card by pushing down with your thumbs
evenly on both sides of the card.
PCI Slot/Card Confi guration
Riser Card
RSC-RR1U-E16 (pre-installed)
Expansion card supported
One PCI-E 3.0 x8 card in x16 slot
5-12