Motherboard Features; Processors; Memory; Serial Ata - Supero SUPERSERVER 5018D-MF User Manual

S S
UPER ERVER 5018D-MF User's Manual
1-2

Motherboard Features

At the heart of the SuperServer 5018D-MF lies the X10SLL-F, a single processor
motherboard based on the Intel® C222 chipset. Below are the main features of the
X10SLL-F (see Figure 1-1 for a block diagram of the chipset).

Processors

The X10SLL-F supports a single Intel
v3 or Intel® Xeon® E3-1200 v3 processor in an LGA1150 socket. Please refer to
the motherboard description pages on our web site for a complete listing of sup-
ported processors.

Memory

The X10SLL-F has four DIMM sockets that can support up to 32 GB of Unbuffered
ECC/non-ECC DDR3-1600/1333 memory. Please refer to Chapter 5 for installing
memory.

Serial ATA

An on-chip SATA controller is integrated into the X10SLL-F to provide two 6 Gb/sec
SATA 3.0 ports and four 3 Gb/sec SATA 2.0 ports.

I/O Ports

The rear I/O ports include one COM port, a VGA (monitor) port, four USB 2.0 ports,
and two gigabit Ethernet ports. A dedicated IPMI LAN port is also included.
®
Core™ i7/i5/i3 DT or Intel® Xeon® E3-1200
1-2