Table of Contents
Advertisement
Chapter 7: BIOS
VGA Palette Snoop
Select Enabled to support VGA palette register snooping which will allow the
PCI cards that do not contain their own VGA color palette to examine the video
cards palette and mimic it for proper color display. The options are Disabled and
Enabled.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
PCH SLOT4 PCI-E 2.0 X4 (IN X8) OPROM
Use this feature to enable or disable PCIe slot Option ROMs to boot the computer
using a device installed on the slot specifi ed. The options are Disabled, Legacy
and EFI.
CPU SLOT6 PCI-E 3.0 X8 (IN X16) OPROM
Use this feature to enable or disable PCIe slot Option ROMs to boot the computer
using a device installed on the slot specifi ed. The options are Disabled, Legacy
and EFI.
CPU SLOT5 PCI-E 3.0 X8 OPROM
Use this feature to enable or disable PCIe slot Option ROMs to boot the computer
using a device installed on the slot specifi ed. The options are Disabled, Legacy
and EFI.
Launch Storage OPROM Policy
This feature controls how the system executes UEFI (Unifi ed Extensible Firmware
Interface), and legacy storage OPROM. Select Legacy Only to boot the system
using a legacy device installed in a PCI slot. The options are Do Not Launch, UEFI
Only and Legacy Only.
Other PCI Device ROM Priority
This feature selects a PCI device OPROM to launch for system boot if this device
is not a network, mass storage, or video device. The options are UEFI Only and
Legacy Only.
Onboard LAN1/LAN2 Option ROM
Select iSCSI to use the iSCSI Option ROM to boot the computer using an iSCSI
device installed in a LAN port specifi ed. Select PXE (Preboot Execution Environ-
7-17
Advertisement
Table of Contents
