Connector Defi Nitions - Supero SUPERSERVER 5018D-MF User Manual

5-8 Connector Defi nitions
Power Connectors
The 24 - pin main power connector
(JPW1) is used to provide power to the
motherboard. The 8-pin CPU power
connector (JPW2) is also required for
the processor. These power connectors
meet the SSI EPS 12V specifi cation. See
the tables on the right for pin defi nitions.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin defi nitions.
Power LED
The Power LED connection is located on
pins 15 and 16 of JF1. Refer to the table
on the right for pin defi nitions.
HDD LED
The HDD LED connections are located on
pins 13 and 14 of JF1. Attach a cable here
to indicate HDD activity. See the table on
the right for pin defi nitions.
Chapter 5: Advanced Motherboard Setup
ATX Power 24-pin Connector
Pin Defi nitions (JPW1)
Pin# Defi nition
13 +3.3V
14 -12V
15 COM
16 PS_ON
17 COM
18 COM
19 COM
20 Res (NC)
21 +5V
22 +5V
23 +5V
24 COM
Processor Power
Pin Defi nitions (JPW2)
Pins
1/2
3/4
NMI Button
Pin Defi nitions (JF1)
Pin#
19
20
Power LED
Pin Defi nitions (JF1)
Pin#
15
16
HDD LED
Pin Defi nitions (JF1)
Pin# Defi nition
13 +3.3V Stby/UID_SW
14 HD Active
5-15
Pin # Defi nition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PWR_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
Defi nition
Ground
+12V
Defi nition
Control
Ground
Defi nition
3.3V
PWR LED