Table of Contents
Advertisement
Figure 2-3. Installing the Server into a Rack
Note: Figure is for illustrative purposes only. Always install servers into a rack
starting at the bottom.
Warning: do not pick up the server with the front handles. They are de-
signed to pull the system from a rack only.
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the fl oor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
(w/ Optional Rackmount Kit)
2-7
Chapter 2: Server Installation
Advertisement
Table of Contents
