Adding Pci Expansion Cards; Motherboard Details - Supero A+ 2022TC-HTRF4 User Manual

5-6

Adding PCI Expansion Cards

The 2022TC-HTRF4 includes one preinstalled riser card designed specifically for
use in the SC827H-R1620BP 2U rackmount chassis. These riser cards support one
low-profile PCI Express x16 card up to 6.59" in length per node.
Installing an Expansion Card
1. After powering down the system, remove the PCI slot shield.
2. Fully seat the card into the slot, pushing down with your thumbs evenly on
both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shield protects the motherboard and its components from EMI
and aid in proper ventilation, so make sure it is always in place.
5-7

Motherboard Details

See the Figure 5-3 for a layout of the H8DCT-HLN4F motherboard.
Jumper
JBT1
JIB1
JI2C1/JI2C2
JPB1
JPG1
JPL1
JWD1
LED
LAN Ports
Dedicated IPMI LAN
LE1
LE2
LE3
DP1
DP2
H8DCT-HLN4F Quick Reference
Description
CMOS Clear
InfiniBand Enable/Disable
I2C to PCI-E Slot Enable/Disable
BMC Enable/Disable
VGA Enable/Disable
LAN 1/2/3/4 Enable/Disable
Watch Dog Enable/Disable
Description
LEDs for the LAN Ethernet ports
LEDs for the dedicated IPMI LAN Ethernet port
LED for UID Button
LED for IPMI activity
LED for Serverboard Power-On
5-11
Chapter 5: Advanced Motherboard Setup
Default Setting
(See Section 5-9)
Pins 1-2 (Enabled)
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)