Table of Contents
Advertisement
SUPERSERVER 1018GR-T User's Manual
1-2
Motherboard Features
At the heart of the 1018GR-T SuperServer is the X10SRG-F, a single processor
motherboard based on the Intel C612 Express chipset. Below are the main features
of the system (See Figure 1-1 for a block diagram of the motherboard).
Processors
The motherboard supports a single Intel E5-2600/1600 Series processor in
LGA 2011 Socket 3. Please refer to the motherboard description pages on
the Supermicro web site for a complete listing of supported processors (www.
supermicro.com).
Memory
The motherboard has eight DIMM slots that can support up to 256GB RDIMM or
512 LRDIMM of DDR4 ECC memory at 1333/1600/2133 MHz. Modules of the same
size and speed are recommended. DIMM sizes are 2GB, 4GB, 8GB, 16GB, 32GB,
64GB. See Chapter 5 for details.
Serial ATA
Two SATA3 controllers are integrated into the chipset to provide a 10-port SATA
subsystem. The sSATA controller supports four SATA drives and the AHCI controller
can support six SATA drives. RAID 0, 1, 5 and 10 are supported, although RAID
cannot be configured across the drives controlled by different controllers. Note:
The operating system you use must have RAID support to enable the hot-swap
capability and RAID function.
The server also supports two SATA DOM ports.
PCI Expansion Slots
The motherboard has two PCI-Express 3.0 x16 slots to support two double-width
GPU cards. An additional slot supports one PCI-Express 3.0 x8 low-profile card.
I/O Ports
The rear I/O ports include two Gb Ethernet LAN ports, one dedicated IPMI LAN
port, two USB 3.0 ports, one COM port, and a VGA (monitor) port
Internal headers include two additional USB 3.0 ports, five USB 2.0 ports (four via
headers, one via eUSB) and one COM port.
1-2
Advertisement
Table of Contents
