View System Troubles; View Alarm Memory - Bosch DS7446KP User Manual

DS7446KP | User Guide | 9.0 System Status Commands
9.3

View System Troubles

[# Command][4][2]
Use this command to view system troubles.
Refer to Table 10 for a list of some system trouble messages.
Table 10: System Trouble Messages
Keypad Display
System running
on battery only.
Comm Fail
Destination 1
Line 1 trouble.
Check dial tone.
Call for service
There are no
system troubles.
9.4

View Alarm Memory

[# Command][4][0]
Use this command to view alarms that were silenced and cleared from the
keypad's display.
22
Cause for Message
There is no AC main supply. The system is running
on standby battery only.
The system failed to communicate with the ARC.
The telephone line is missing, or there is no dial
tone.
Call your alarm company for a service visit.
No system troubles exist.
Bosch Security Systems | 12/04 | 4998149924B