Adapt Microwave Oven Blower For Recirculation - GE JVM2052 Installation Instructions Manual

Installation Instructions
ADAPT MICROWAVE OVEN
BLOWER FOR RECIRCULATION
[] Remove and save ] blower plate screws
and 2 blower unit mounting screws.
Blower p late
.-_ mounting screw
.......... ! : (3 screws)
_--_Blower plate
Blower u nit
_B Bacl<plate
Iowe[ unit
J '",_ raountlngscrew
(2 screws)
[_ Carefullg pull out the blower unit. The wires
will extend far enough to allow gou to adjust the
blower unit.
[_ Roll the blower unit 90° so that fan blade openings
are facing toward the front of the microwave oven.
Roll 4_--'_
NOTE:Make sure wires remain routed in the grooves
of the motor frame.
[_ Place the blower unit back into the opening.
WARNi NG: Risk ofelectric shock
can
cause injury or death. Do not pull or stretch the
blower unit wiring. Make sure the wires are not
pinched.
[_ Reattach the blower plate to the microwave oven.
Attach with the ] blower plate mounting screws
and then the 2 blower unit mounting screws.
Blower plate
_"] . ............ i mounting screw
.......... ! _ (3 screws)
Blower plate
Blower unit
_ Bacl< plate
_LJ j ' Blowerunit
J_ --':__ mountingscrew
(2 screws)
2O