Mount The Microwave Oven - GE JVM2052 Installation Instructions Manual

Installation Instructions
MOUNT THE MICROWAVE OVEN
-&CAUTIO N: To °void t herisk of
personal
injurg (back injurg or other injuries due to excessive
weight of the microwave oven) or propertg damage,
gou will need two people to install this microwave
oven.
IMPORTANT:Do not grip or use handle during
installation.
-&WARNI NG:
Risk of Electric Shock.
Can cause injurg or death: If installing unit with
metal countertops, cover the edge of the power
supplg cord hole with the power supplg cord
bushing.
IMPORTANT: If filler blocks are not used, case damage
may occur from overtightening screws.
NOTE:When mounting the
microwave oven, thread
power cord through hole
in bottom of top cabinet.
Keep it tight throughout
Steps 1-3. Do not pinch
cord or lift oven bg pulling
cord.
[] Lift microwave oven,
tilt it forward, and hook
slots at back bottom
edge onto four lower
tabs of mounting plate.
_] Rotate front of oven up
against cabinet bottom.
[_] Insert a self-aligning screw through top-center
cabinet hole. Temporarily secure the oven by
turning the screw at least two full turns after
the threads hove engaged. (It will be completely
tightened later.)
Dan_er
I
Use the power supplg cord clamp to bundle the
power supplg cord. Install the power supplg cord
clamp, using a screw as shown, to the inside of
the cabinet.
CabinetFront
CabinetBottomShelf
FillerBlock
Equivalent
to Depth
of Cabinet
Recess
Self-AligningScrew
MicrowaveOvenTop
[_] Attach the microwave oven to the top cabinet.
[_ Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns
on each screw.
[_] Tighten the two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall
and the top cabinet.)
I / liL_
[_ Install grease filter. See the Owner's Manual
pocked with the microwave oven.
18