Attach Mounting Plate To Wall - GE JVM2052 Installation Instructions Manual

Installation Instructions
J-AIOUTSIDE TOP EXHAUST
{Vertical Duct)
INSTALLATION OVERVIEW
A1. Attach Hounting Plate to Wall
A2. Prepare Top Cabinet
A3. Attach Exhaust Damper
A4. Hount Hicrowave Oven
IAll ATTACH THE MOUNTING PLATE
TO TH E WALL
II
Attach the plate to the wall using toggle bolts.
At least one wood screw must be used to attach
the plate to a wall stud.
[] Remove the toggle wings from the bolts.
[] Insert the bolts into the mounting plate through
the holes designated to go into drywall and reattach
the toggle wings to s/4"onto each bolt.
12
To use toggle bolts:
Spacingfor Toggles
MoreThanWall
-_l_,-_j_Thickness
ToggleWings
Mounting
Plate
,,I,
Bolt End
[_ Place the mounting plate against the wall and insert
the toggle wings into the holes in the wall to mount
the plate.
NOTE: Before tightening toggle bolts and wood screw,
make sure the tabs on the mounting plate touch
the bottom of the cabinet when pushed flush against
the wall and that the plate is properly centered under
the cabinet.
-A CAUTION:
Be careful to avoid pinching
fingers between the back of the mounting plate and
the wall.
[_ Tighten all bolts. Pull the plate away from the wall
to help tighten the bolts.