Damage - Shipment/Installation; Parts Included - GE JVM2052 Installation Instructions Manual

Installation Instructions
DAMAGE- SHIPMENT/
INSTALLATION
• If the unit is damaged in shipment, return the unit
to the store in which it was bought for repair or
replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.
PARTS INCLUDED
HARDWARE PACKET
PART QUANTITY
LagScrews
(1A"x 2"} 4
(for wall stud holes)
i _b_,_,_,,_ ToggleBolts(1/4" x 3") 4
(for drywall holes)
SpringToggleHeads 4
(for toggle bolts)
Bolts 2
(for securing to
the uppercabinet)
Tapping Screws(1A"x 1 A") 1 black
(for attachingthe 2 bronze
damperduct connector)
PowerCordClampand 1
Dark-Colored M ounting
Screw (to hold
the powercord)
You will find the installation hardware contained
in a pocket with the unit. Check to make sure you
hove all these ports.
NOTE:Some extra ports ore included.
NOTE:You need to install at least two log screws
into a 2" x 4" stud and four anchor bolts into the wall.
Also, the mounting area must meet the 150 Ibs.weight
requirement.
PARTS INCLUDED
ADDITIONAL PARTS
PART QUANTITY
L •
i pperCabinet
÷ Template
RearWall
..,0i Template
i (3 pieces
mounting
plateonly)
installation
instructions
Exhaust
Adapter
Damper 1
PowerCord 1
____'_' Clamp Bushing
(forthe cord
holein a metal
uppercabinet)
6