Table of Contents
Advertisement
Available languages
Available languages
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to wall behind range.
Reconnect the anti-tip bracket,
if the range is moved.
Failure to follow
these instructions can result
in death or serious burns to children and adults.
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Tools needed
•
Tape measure
•
#2 Phillips screwdriver
•
1/8"x 41¼ '' flat-blade
screwdriver
•
Level
•
Drill
•
Wrench or pliers
•
Pipe wrench
•
Adjustable wrench or
8/8"wrench
•
3/8"drive ratchet
•
1/8"drill bit
•
18/le"combination
wrench
•
1/4",3/8", 8/W' nut drivers
•
3/ls" carbide tip masonry bit
•
Marker or pencil
•
Pipe-joint compound
resistant to LP gas
•
Noncorrosive leak-detection
solution
•
Tubing cutter
Parts supplied
Check that all parts are included.
•
Anti-tip bracket kit
For LP/Natural
Gas
Conversions
•
T15 Torx ®tscrewdriver
•
7/8"socket
•
Adjustable wrench
•
1/2"deep-well socket
•
7 mm nut driver
•
Masking tape
•
Gas pressure regulator
•
Burner grates
•
Burner heads and caps
•
Griddle drip tray (on griddle models)
•
LP orifice package (W10221288)
•
Conversion label (VV10221320)
NOTE: The cooktop is manufactured
for use with Natural gas.
To convert to LP gas, see the "Gas Conversions"
section.
Parts needed
•
Power supply cord kit:
•
30" (76.2 cm) and 36" (91.4 cm) models - A UL listed
40 amp power supply cord kit
•
48" (121.9 cm) models - A UL listed 50 amp power supply
cord kit marked for use with nominal 13/8 '' (34.93 mm)
diameter connection openings
•
A UL listed strain relief
•
UL listed wire connectors
All models must be installed with a backguard
if installing at zero
clearance to a combustible
backwall. See "Cabinet Dimensions"
in the "Location Requirements"
section for installation
requirements.
•
30" (76.2 cm) Adjustable Backguard
Order Part Number 8285148
•
36" (91.4 cm) Adjustable Backguard
Order Part Number 8284756
•
48" (121.9 cm) Adjustable Backguard
Order Part Number 8284755
•
9" (22.9 cm) Backguard for 30" (76.2 cm) Ranges
Order Part Number W10115773
A. Anti-tip bracket
B. #8-18 x 111 Phillips head screws (4)
NOTE: Anti-tip bracket must be securely mounted to
subfloor. Thickness of flooring may require longer screws to
anchor bracket to subfloor. Longer screws are available from
your local hardware store. See "Install Anti-Tip Bracket"
section.
I"®TORX is a registered trademark
of Saturn Fasteners,
Inc.
•
9" (22.9 cm) Backguard for 36" (91.4 cm) Ranges
Order Part Number W10115776
•
9" (22.9 cm) Backguard for 48" (121.9 cm) Ranges
Order Part Number W10115777
•
22" (55.9 cm) Backsplash with Dual-Position
Shelf for
30" (76.2 cm) Ranges
Order Part Number W10285447
•
22" (55.9 cm) Backsplash with Dual-Position
Shelf for
36" (91.4 cm) Ranges
Order Part Number W10285448
•
22" (55.9 cm) Backsplash with Dual-Position
Shelf for
48" (121.9 cm) Ranges
Order Part Number W10285449
To order, see the "Assistance
or Service" section of the Use
and Care Guide.
Advertisement
Table of Contents
