Direct Extension Assignment; Programming A Guest Phone; Re-Establishing The Guest Phone; Re-Establishing Your Old Phone - Cisco 7960 User Manual

Direct Extension Assignment

Direct Extension Assignment

Programming a Guest Phone

Re-establishing the Guest Phone

Re-establishing Your Old Phone

42 System Telephone Features
•
Distinctive Rings – A different ring tone is provided for up to two
additional Direct Inward Dial (DID) numbers assigned to your telephone
by the system administrator. These numbers do not appear as lines on
your telephone, but ring your prime line with the appropriate ring when
they are dialed.
•
Priority Ring – The call screening feature allows users to designate
specific callers as important enough to ring through to their telephone
even if Do Not Disturb is activated. A different ring tone is provided for
calls assigned the Priority Call option. See "Priority Call" on page 61.
This feature lets you program another telephone in the same corporate system to
be your telephone. For example, you are visiting a branch office for an extended
business trip and you want to program a "guest" telephone to ring as your
telephone while you are there. This feature requires your old phone and the "new/
guest" phone to be the same type of phone.
To program a guest phone to act as your phone, follow these steps:
1. From the guest /new phone, dial 588 (or the code provided by your system
administrator). You are prompted to enter the telephone number which you
want that phone to be (Presumably, your "original/old" phone number).
2. Enter your complete 10-digit telephone number, followed by the # key. You
are prompted to enter a password. The password default is the last four digits
of the phone number entered in this step.
3. Enter your password, followed by the # key. The phone is now programmed
to be your phone and your old phone is removed from service.
NOTE: When you reassign your telephone number to the new phone, the button template
from your "old" phone is assigned to the "new" phone.
To reset the guest phone to its original number, follow the steps to program a
phone, using the original phone number and password of the guest phone.
Once you have programmed another phone with your old phone's extension, you
must reconfigure your old phone before using it. Your old phone displays the
message "Pickup handset to configure". Pickup the handset and perform the
following steps:
Cisco 7960/7940 Telephone User Guide
620-05600070B