38
Call Transfer
Outside lines can be transferred from one phone to another
within the system. The transfer can be either screened
(announced) or unscreened to either an idle or busy station, an
ACD/UCD Group, or a Hunt Group.
Executive/Secretary Transfer
If you are designated the:
Executive station, and your phone is busy or in DND, all calls
will be routed to the Secretary station.
Secretary station, you can signal the Executive that is busy
or in DND by using the Camp On feature.
PBX/CENTREX Transfer
While connected to an outside line (PBX/Centrex):
1. Press FLASH. The transfer dial tone will be heard.
2. Dial the PBX/Centrex station number.
3. Hang up to complete the transfer.
SINGLE LINE TELEPHONE
To make a PBX/Centrex Transfer:
1. Briefly depress and release the hookswitch. An intercom
dial tone will sound.
2. Dial [660]. A Flash command is presented to the PBX or
Centrex CO Line (a stutter tone will sound).
3. Dial the desired telephone number.
4. Replace the handset to complete transfer.
Call Transfer