Vodavi User Manual page 64

48
To exit a Conference (controller only):
For a Single-line conference ...
1. Press the ON/OFF button to ON.
2. Press the MUTE button, then replace the handset to
monitor the conference.
For a Multi-line conference ...
1. Press the HOLD button to place outside parties on hold.
The Hold Timer starts. If one of the two parties is internal,
that party is dropped.
2. Press CONF and hang up or press the ON/OFF button to
leave the other conference parties still connected in an
unsupervised conference. The CONF button flashes and the
timer starts. There is a warning tone before the other
parties are dropped.
To re-enter a Conference:
When the controller re-enters the conference, the disconnect
timer is reset.
1. Lift the handset to re-enter a monitored conference.
2. To re-enter a conference placed on hold, repeat steps for
establishing a conference.
3. To re-enter an unsupervised conference, lift the handset
and press the flashing CONF button. The CONF button will
light steady and a confirmation tone will sound.
To terminate a Conference, the conference initiator who is
actively in the conference must:
Replace the handset or press the ON/OFF button to OFF.
To terminate an Unsupervised Conference:
Press the flashing CONF button while on-hook, all parties
will be dropped.
Conference