Loop Key
CO Line Queue Cancel
To cancel a Call Back Request:
1. Dial the CO Line Queue Cancel code [626] on the dial pad.
2. Replace the handset or press the ON/OFF button.
Loop Key
A station not having a direct appearance for a CO line will
receive incoming CO calls and transferred CO calls under the
LOOP button. Only one call at a time can be connected to a
keyset on the LOOP button.
To make a Loop button:
1. Press the SPEED button twice.
2. Press the desired flexible button.
3. Dial [89].
4. Press HOLD.
Mailbox Buttons
To program a station's mailbox on a flexible button:
1. Press the SPEED button twice.
2. Press the desired flexible button to be programmed.
3. Dial the mailbox feature access code (460-467 = voice mail
location 1-8; 468 = remote voice mail location).
4. Dial the VMID number. A confirmation tone will sound. If an
error is made during entry, an error tone will sound.
❑
Flex
Btn
❑
Flex
Btn
Feature code 468 does not apply to
65
Mach I
systems.