Menu Settings; Descaling; Setting The Language; Energy Saving - DeLonghi ESAM 04.320 Owner's Manual

Important!
To avoid damaging the appliance, always press the
button (fig. 5) to turn off.
Danger of burns!
during rinsing, a little hot water flows from the coffee spouts.
avoid contact with splashes of water.
To turn the appliance off, press the
appliance performs a rinse cycle then goes off.
Please note:
if the appliance is not used for an extended period, place the
main switch in the 0 position (fig. 6).
Never place the main switch in the 0 position while the
appliance is on.

MENU SETTINGS

When you access the settings menu by pressing the MeNu
button, the following menu items can be selected: descale,
Set language, energy saving, Cup warmer, adjust time, auto-
start, auto-off, Set temperature, Water hardness, Statistics,
default values.

Descaling

For instructions on descaling, see page 15.

Setting the language

To modify the language of the display, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until "Set language" is
displayed;
3. Press the OK button;
4. Press the or button until the required language is
displayed;
5. Press the OK button to confirm;
6. Press the ESC button exit the menu.

Energy Saving

use this function to enable or disable "energy saving" mode.
When enabled, the function reduces energy consumption in
compliance with european regulations.
To enable or disable the function, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until "energy saving" is
displayed;
3. Press the OK button. "disable?" is displayed (or "enable?"
if the function has already been disabled).
4. Press the OK button to disable or enable the func-tion or
the ESC button a number of times to exit the menu.
When the function is active, if the machine is not used for
about 1 minute, "energy saving" is displayed.
• To exit the " Energy saving" mode, first press a button, then
press the button relative to the desired drink.
• A few seconds may elapse between " Energy saving" mode
and delivery of the first drink; "Preparation underway..." is
displayed.

Cup warmer

button (fig. 5). The
This function enables the cup warmer to be enabled or disabled.
Proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or
3. Press the OK button. "enable?" is displayed (or "disable?"
if the function has already been enabled).
4. Press the OK button to enable or disable the func-tion or
the ESC button a number of times to exit the menu.
Warming the cups keeps the coffee hot.

Adjust time

To adjust the time on the display, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or
3. Press the OK button. The hours flash on the display;
4. Press the or
5. Press the OK button to confirm. The minutes flash on the
display;
6. Press the or
7. Press the OK button to confirm;
8. Press the ESC button to exit the settings menu.
The display shows the time when the appliance is in stand-by
ro the energy saving mode is enabled: if the time is not set, the
display shows "0:00" blinking.

Auto-Start

you can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
To enable this function, the time must be set correctly.
To enabled auto-on, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or
3. Press the OK button. "enable?" is displayed;
4. Press the OK button. The hours flash on the display;
5. Press the or
6. Press the OK button to confirm. The minutes flash on the
display;
7. Press the or
10
Please note!
button until "Cup warmer" is displayed;
button until "adjust time" is displayed;
button to change the hours;
button to change the minutes;
Please note!
Please note!
button until "auto-start" is displayed;
button to select the hours;
button to change the minutes;