Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
STEP 6
There is an "L" decal on the LEFT PEDAL ARM(4) and LEFT PEDAL CAP(45), and an "R" decal on the
RIGHT PEDAL ARM(5) and RIGHT PEDAL CAP(46). Attach the RIGHT PEDAL CAP(46) to the RIGHT
PEDAL ARM(5) with ROUND HEAD SCREWS(M5x15mm)(66). Repeat on the left side.
NOTE: The LEFT and RIGHT PEDAL CAPS(45, 46) have a raised lip on two sides. Attach the LEFT and
RIGHT PEDAL CAPS(45, 46) to the LEFT and RIGHT PEDAL ARMS(4, 5) so the raised lip is on
the front and the inner sides.
STEP 7
Attach the LINKAGES(11) to the LEFT and RIGHT PEDAL ARM(4, 5) at both sides with the PLASTIC
WASHERS(M8)(48), BUTTON HEAD BOLTS(M8x1.25x48mm)(60), and NYLOCK NUTS(M8x1.25)(68).
L
L
10
R
R
Advertisement
Table of Contents
