Cisco DPC2420 User Manual page 93

Field Name
Time Access Rule
Session Duration
Inactivity time
Available Rules
Current Used Rules
Function Keys
The following function keys appear on the Setup Parental Control - User Setup page.
Key
Add User
Remove User
Apply
4021194 Rev A
Description
Select the Time Access Rule for the current user profile. Time
Access Rules must first be defined by going to the Time of Day
Filter page. You can access the Time of Day Filter page by clicking
the Time of Day Rules link under the Parental Control section of
the Setup page.
1440 minutes (factory default).
Enter the amount of time in minutes that the user will be granted
Internet access beginning at the time they sign on using their user
name and password.
Note: Set the Session Duration to 0 (zero) to prevent session
timeout.
60 minutes (factory default).
Enter the amount of time during a user session where there is no
Internet access activity, indicating that the user is no longer online.
If the inactivity timer is triggered, the user session will be closed
automatically. In order to regain Internet access, the user must log
in again with their user name and password.
Note: Set the Inactivity time value to 0 (zero) to prevent timeout
due to inactivity.
Lists available rules. Apply a rule by selecting it from the list and
adding it to the current user profile.
Note: This field appears only if rules have been created. Create
rules using the Parental Control Setup pages that follow next.
Lists rules in use for the current user profile. You can apply a
maximum of four rules to each user profile.
Note: This field appears only when a rule is associated with a user
profile.
Description
Adds and saves a new user to the list of user profiles
Removes the selected user from the list of user profiles
Saves all additions, edits, and changes
Configure Parental Control Settings
73