Cisco DPC2420 User Manual page 53

Field Name
Latest Update Success
Time Zone
Daylight Saving Time
Time Server
Function Keys
Key
Apply
Add Server
Remove Server
Under normal conditions, you should use the default network settings. In the event
that the network time does not match your local time, or, if your system requires
different settings to operate correctly, you can change the default network settings
using the Setup Basic Settings - Network Configuration page.
4021194 Rev A
Description
Displays the time and date of the last successful time update
Displays the current time zone. The drop-down list allows you to
select your local time zone.
Allows you to adjust the time during periods when Daylight
Saving Time is in effect. Check the Enable box to enable or
disable this setting.
Note: If the offset for Daylight Savings Time is other than 60
minutes, enter the offset in the minutes field.
Add and delete time server URLs or IP addresses to and from the
list, as required. When using Network Time Protocol, multiple
time servers can be specified for the gateway to query for time of
day. The gateway will sequentially step through the listed time
servers until it acquires the current time. There are three well
known public time servers entered as default servers.
Description
Saves all additions, edits, and changes
Allows you to add a network time server
Allows you to remove a network time server
Configure Basic Settings
33