Chapter 4 Operation of Front Panel Indicators
Normal Operations (AC Power Applied)
The following chart illustrates the appearance of the residential gateway front panel
LED status indicators during normal operations when AC power is applied to the
gateway.
Front Panel LED Status Indicators During Normal Conditions
Front Panel Indicator
1
POWER
2
DS
3
US
4
ON-INE
5
PC
6
WLAN
7
WLANSETUP
8
LINE1
9
LINE2
98
Normal Operations
On
On
On
On
On
On - When a single device is connected to the Ethernet
port and no data is being sent to or from the residential
gateway
Blinks - When only one Ethernet device is connected and
data is being transferred between the consumer premise
equipment (CPE) and the wireless home gateway
Off - When no devices are connected to the Ethernet ports
Off - When wireless setup is not active (normal condition).
Blinks - When the user has activated wireless setup to add
new wireless clients to the wireless network.
On - When telephony service is enabled
Blinks - When line 1 is in use
On - When telephony service is enabled
Blinks - When line 2 is in use
4021194 Rev A