Cisco DPC2420 User Manual page 112

Chapter 3 Configuring the DOCSIS Residential Gateway
Field Name
RTS Threshold
Short Retry Limit
Short Retry Limit
Configuring Wireless Access Point Access Control
Use the Setup Wireless - Access Control page to configure your configure your
wireless access point access control.
Note: If you are not familiar with the advanced settings detailed in this section,
contact your service provider before you attempt to change any of the residential
gateway default wireless advanced settings.
Click Access Control in the Wireless section of the Setup page to access the Setup
Wireless - Access Control page.
Setup Wireless Access Control Page
The following illustration is an example of the Setup Wireless - Access Control page.
92
Description
Determines at what packet size beyond which the ready to send/clear
to send (RTS/CTS) mechanism is invoked. The factory default is 2347
The number of times the gateway transmits an unacknowledged
unicast frame that is shorter than the RTS threshold before discarding
the frame. The factory default is 7
The number of times the gateway transmits an unacknowledged
unicast frame that is longer than the RTS threshold before discarding
the frame. The factory default is 4
4021194 Rev A