Cisco DPC2420 User Manual page 57

Configure Basic Settings
Configuring and Managing IP Addresses
Use the Setup Basic Settings - IP Management page to configure how your system
manages and assigns IP addresses in your network.
Note: If you are not familiar with the IP management procedures detailed in this
section, contact your service provider before you attempt to change any of the
residential gateway default IP management settings.
Click LAN IP Address Management in the Basic Settings section of the Setup page
to access the Setup Basic Settings - IP Management page.
Setup Basic Settings - IP Management Page Example
The following illustration is an example of the Setup Basic Settings - IP Management
page.
4021194 Rev A 37