Removing Oven Door; Replacing Oven Door; Replacing Oven Light - Amana AOES3030 Series Owner's Manual

Removing Oven Door

CAUTION
To avoid personal injury or property damage, handle
oven door with care. Door is heavy and can be
damaged if dropped.
Do not place hands in hinge area when door is
removed. Hinge can snap closed and pinch your
hands.
Door contains tempered glass. If glass is scratched,
chipped, impacted or twisted it may break suddenly. If
door glass appears damaged it should be replaced
immediately.
Oven door can be removed for ease in cleaning large
spills.
1. Open door to first stop.
2. Remove screws in door liner.
3. Grasp door firmly on each side and lift upward off
hinges. Do not push hinges closed once oven door is
removed.
• Do not lift door using door handle.
Remove
screw here

Replacing Oven Door

1. Make sure hinges are open to first stop position. If
hinges have been accidentally closed, carefully pull
them open to first stop. Align door with hinge arms.
2. Slide door down and into place. Be sure door is
completely down on hinges.
3. Replace screws in door liner.

Replacing Oven Light

Protective gloves must be worn when changing light bulb.
1. Disconnect electrical supply by turning off power at
fuse box.
2. Remove oven door.
3. Remove light cover by inserting a screwdriver, blade
end covered in masking tape, into slot at front of lens
cover and prying lens cover downward.
4. Unscrew bulb from receptacle.
• Replacement bulbs are available through your local
Amana service or parts center.
Remove
screw here
31