Regulatory And Safety Compliance; Safety; Electromagnetic Compatibility (Emc - Kodak 605 User Manual

Regulatory and Safety Compliance

Safety

Electromagnetic
Compatibility (EMC)
April 9, 2007
Complies with UL 60950-1:2003
CAN/CSA C22.2 No. 60950-1-03
EN 60950-1:2001
IEC 60950-1:2001
Tested for Norwegian IT Power systems 240V phase to phase
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause interference to radio
communications. Operation of this equipment in a residential area is
likely to cause interference in which case the user will be required to
correct the interference at his or her own expense.
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Requirements of the EMC directive 89/336/EEC were met through compliance
with the following:
• EN 55022: 1998+A1: 2000+A2: 2003 Class A
• EN 61000-3-2: 2000+A2: 2005 Class A
• EN 61000-3-3: 1995+A1: 2001+A2: 2005
• EN 55024: 1998+A1: 2001+A2: 2003
– EN 61000-4-2 ESD
– EN 61000-4-3 Radiated RF Immunity
– EN 61000-4-4 EFT
– EN 61000-4-5 Surge
– EN 61000-4-6 Conducted RF Immunity
– EN 61000-4-8
– EN 61000-4-11 Voltage Dips and Interruptions
Safety and Regulatory Information
B-3