Table of Contents
Advertisement
January 1998
Making a Test Print
The 8657 Printer can print a test page without needing a file to be sent
from a computer. The test image helps you verify proper setup and
printer operation, and confirm print quality.
You should make a test print after installing the printer to check
print quality.
To make a test print, follow these steps:
1. Make sure that READY appears on the display panel.
2. Press the Print button on the display panel.
While image data is processing, the following message will appear on
the display panel:
PROCESSING:
TEST PRINT
Once the image data is processed, the following message will be
displayed:
PRINTING
As printing takes place, the printer moves the paper through the imaging
path multiple times. During this process, the paper will partially exit the
printer. Do not pull on the print during any of the passes. Wait until the
print exits completely before touching it.
Getting Started
1–35
Advertisement
Table of Contents
