Loudspeaking - The loudspeaker is turned on when the telephone is placed in
●
charger during a call. The loudspeaker is turned off when the telephone is removed
from the charger.
End call - The ongoing call is disconnected when the telephone is placed in charger.
●
In Charger Actions when not in Call
Redirect Calls and Messages when Placed in Charger
Calls can be redirected to another extension when the cordless telephone is placed in a
charger. Then it will not ring when receiving a call. The function is automatically cancelled when
the telephone is removed from the charger.
1. Select In charger.
2. Select Other actions.
3. Select Redirect.
Note:
The function and the extension must be programmed in the PBX to be able to
Note:
redirect calls.
Switch off While Charging
When the cordless telephone is placed in the charger, it can be switched off while it is charging.
When it is removed from the charger, it will switch on again.
1. Select In charger.
2. Select Other actions.
3. Select Switch off.
Sound off While Charging
When the cordless telephone is placed in the charger, the tones can be switched off while it is
charging. When it is removed from the charger, the sound is switched on again.
1. Select In charger.
2. Select Other actions.
3. Select Sound off.
Note:
If the parameter Disable permanent mute is enabled, the telephone will not be
Note:
muted when placed in charger. See Installation and Administration Manual,
DECT R4.
Deactivate the Charging Mode
1. Select In charger.
58
Avaya 3725 DECT Telephone - User Guide
09/2012