Table of Contents
Advertisement
1
Try to print!
Loading a PC card
Usable PC cards
Always use a PC card corresponding to PCMCIA TYPE I/II Standard compliant
ATA.
The following cards are automatically recognized.
Various memory cards can be used by using a PC card adapter matched to the
memory card.
• Microdrive only PC card adapter (IBM, MELCO, FUJIFILM)
• PC card adapter MSAC PC2 for memory stick (SONY)
• PC card adapter for CompactFlash (SUNTEX)
• PC card adapter for SD card (MATSUSHITA ELECTRIC)
• PC card adapter PC-AD3 for SmartMedia (FUJIFILM)
✽ Use a PC to format SmartMedia.
• Windows 98/98 SE/Me: Normal format
• Windows XP: FAT
• Macintosh: DOS format
1
Select [PC card] by sliding the card select lever
at the front center of the printer to the left.
Note
• SmartMedia and PC card cannot be loaded into the printer at
the same time.
2
Insert the PC card fully into the slot with the front
of the card facing upward.
Note
• When using a PC card adapter, install the memory card to
the adapter in advance.
I The following files cannot be printed in the full print, multi print and ID print modes:
Destroyed file
Files of supportable format, but since the picture
was destroyed, they cannot be displayed.
Supportable formats : Page 98 (Specifications)
Voice file
Picture file with voice memory
Cannot be printed.
Can be printed.
PRINT ALL PICTURES (→P. 20):
The number of prints is counted for files that cannot be printed, but the files are not printed.
INDEX PRINT (→P. 27):
Icons are printed depending on the kind of picture. See page 27.
14
T I P
• When the [BUSY] lamp is
off, the memory card can be
removed at any time.
Unknown file
File other than supportable format.
Cannot be displayed.
Supportable formats : Page 98 (Specifications)
Picture file (AVI)
Cannot be printed.
1
Try to print!
SELECTING THE PHOTOGRAPHS
AND PRINTING
Select the picture to be printed
1
When a memory card is loaded, the "SELECT
FRAME" window is displayed. Use ab to select
"EACH FRAME", and press the [SET] button.
EACH FRAME:
The pictures on the memory card are displayed on
the monitor screen one frame at a time. Each frame
can be selected.
ALL FRAMES:
The pictures on the memory card are displayed on
the monitor screen in batches of 9 frames each. All
the frames can be selected (→P. 20).
2
The picture window is displayed. Use d c to
select the picture you want to print.
When the "STARTUP MODE" setting is "FULL"
(→P. 40), the monitor can be returned to this
window by pressing the [BACK] button for 3
seconds or longer.
Setting the print quantity
1
Use the [QUANTITY] [+] [-] buttons to set the
print quantity.
After setting the print quantity, press the [SET]
button.
Printing
Note: Do not pull out the trash box while printing.
1
Press the [PREVIEW] button and check the
pictures to be printed and the quantity of prints.
If the preview contents are correct, press the
[PRINT] button.
The Printing window is displayed and printing is
started. At the end of printing, the paper ejects from
the printer and the monitor returns to the picture
window.
Note
• Do not touch the moving paper while printing.
• Do not remove the memory card while printing.
• Do not pull out the trash box while printing.
• When an error window or information window is displayed,
refer to pages 46 to 50.
Select
T I P
• When there is DPOF data,
pictures are printed in
accordance with the DPOF
data (→P. 34).
T I P
• When the image is 4 frames or
more, and d c is pressed for
1 second or longer, the image
is quick scrolled. However, for
files other than Exif (JPEG,
TIFF-YC/RGB), only image
type characters are displayed.
T I P
• When the LCD monitor is
difficult to view, adjust the
brightness by pressing the
[DISPLAY] button for 2
seconds.
T I P
• You can specify any quantity
of pictures to be printed. If
you want to print more
pictures, select consecutive
pictures and set print quantity.
T I P
• When the [BACK] button is
pressed before printing is
executed, the monitor is
returned to the picture
window.
T I P
• When d c is pressed when
plural pictures were selected,
only the picture being printed
is displayed.
• To halt printing during multi-
picture printing, press the
[BACK] button.
15
Advertisement
Table of Contents
