Table of Contents
Advertisement
Always grasp the plug itself when unplugging the
printer.
Pulling on the cord could damage the cord and cause a fire or
electric shock.
Unplug the printer when cleaning it or not used for an
extended period.
Unplug the printer for safety.
Request routine inspection and cleaning of the interior
of the printer.
Accumulated dust inside the printer can cause fire or other
trouble.
G Request your FUJIFILM dealer or authorized FUJIFILM
service facility to clean the interior of the printer about once
every three years.
MISCELLANEOUS NOTE
Installation site
G Do not use or store the printer where the temperature and
humidity are high, where vibrations are present, where the
printer will be in direct sunlight, where it is dusty or sandy, or
where the printer may be exposed to rain.
G If the printer interferes with radio or television reception,
install it away from the radio or television set.
Transporting
G Store the original packing material. It is needed when
repacking and shipping the printer later.
G When moving the printer, always remove the memory card.
Data
G The memory contents cannot be compensated. If data
cannot be written or read due to hardware or software
trouble, FUJIFILM is not responsible for memory contents
compensation.
Use
G Do not cover the printer with a cloth or blanket while it is in
use. It may cause erroneous operation or a serious accident.
G Use the printer on a firm and flat surface.
G Do not move the printer while it is operating. It may cause
trouble.
G Do not subject the printer to shock or vibration while it is
operating. It may cause an error or destroy the data.
Safety
G If foreign matter or a liquid gets into the printer, immediately
stop use, unplug the power cord, and contact your FUJIFILM
dealer or nearest FUJIFILM service facility.
I These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages
resulting from errors in this Owner's Manual.
2
Do not move the printer while it is still plugged in.
This could damage the cord and cause a fire or electric shock.
Do not stare for a long time at the light emitting from the
printer.
Looking for short periods should not cause any harm, but
staring at the light for lengthy periods could result in impaired
eyesight.
Copyright
G The use of prints other than those created or photographed
by you without the permission of the copyright holder is
prohibited by copyright law, except when the prints are for
personal use.
Cooling Fan Operation
G When the temperature inside the printer rises to a certain
level, a cooling fan automatically begins to operate.
Similarly, when the temperature inside the printer drops
below a certain level, the cooling fan automatically stops.
Thermal Head Wear
G The thermal head will wear out, which results in diminished
print quality. When this occurs, the thermal head must be
replaced. Contact your FUJIFILM dealer.
Condensation
G Note that the following can result in the formation of
condensation in the printer:
• Placing the printer in very humid or steamy locations
• Moving the printer from a cold outdoor location into a warm
room.
• Moving the printer suddenly from an air-conditioned room
into a very warm and humid environment.
G Using the printer when condensation has formed inside the
printer can cause faults or abnormal operation, such as
impaired image quality, uneven color distribution and paper
jams.
G To dispel any condensation inside the printer, plug the
printer power cord into a power outlet, turn on the power by
pressing the POWER button, and leave the printer for
approximately 2 hours. The inside of the printer will warm-up
and dry out.
IMPORTANT
Be sure to read this page before using the Software.
NOTICE
BEFORE OPENING THE PACKAGE OF CD-ROM PROVIDED BY
FUJI PHOTO FILM CO., LTD., ("FUJIFILM") PLEASE READ THIS
END USER LICENSE AGREEMENT CAREFULLY. ONLY IF YOU
DO AGREE TO THIS AGREEMENT, YOU WILL BE ABLE TO USE
THE SOFTWARE RECORDED ON THE CD-ROM. BY OPENING
THE PACKAGE, YOU ACCEPT AND AGREE TO BE BOUND BY
THIS AGREEMENT.
End User License Agreement
This End User License Agreement ("Agreement") is an agreement
between Fuji Photo Film Co., Ltd. and you, which sets forth the
terms and conditions of the license granted for you to use the
software provided by FUJIFILM.
The CD-ROM contains third party software. In case a separate
agreement is provided by a third party supplier for its software, the
provisions of such separate agreement shall apply to the use of
such third party software, prevailing over those of this Agreement.
1. Definitions.
(a) "Media" means the CD-ROM titled "Software for Printpix Digital
Photo Printer CX-400" which is provided to you together with this
Agreement.
(b) "Software" means the software which is recorded on Media.
(c) "Documentation" means the operation manuals of Software and
other related written materials which are provided to you together
with Media.
(d) "Product" means Media (including Software) and Documentation
collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary
machine executable form;
(b) to use Software on the computer onto which Software is installed;
and
(c) to make one backup copy of Software.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or
any part of Software, Media or Documentation to any third party
without FUJIFILM's prior written consent. You also shall not
sublicense, assign or otherwise transfer all or any part of the
rights granted to you by FUJIFILM under this Agreement without
FUJIFILM's prior written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall
not copy or reproduce all or any part of Software or
Documentation.
3.3 You shall not modify, adapt or translate Software or
Documentation. You also shall not alter or remove copyright and
other proprietary notices that appear on or in Software or
Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer,
decompile, or disassemble Software.
4. Ownership.
All copyrights and other proprietary rights to Software and
Documentation are owned and retained by FUJIFILM or the third
party suppliers as indicated on or in Software or Documentation.
Nothing contained herein shall be construed, expressly or implicitly,
as transferring or granting any right, license, or title to you other than
those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in
material and workmanship under normal use for ninety (90) days
from the date of your receipt of Media. Should Media not meet the
foregoing warranty, FUJIFILM shall replace such defective Media
with other Media bearing no defect. FUJIFILM's entire liability and
your sole and exclusive remedy with regard to any defect in Media
shall be expressly limited to such FUJIFILM's replacement of Media
as provided herein.
6. DISCLAIMER OF WARRANTY.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM
PROVIDES PRODUCT "AS IS" AND WITHOUT WARRANTIES OF
ANY KIND, EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO
WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY
OTHER MATTERS, INCLUDING, BUT NOT LIMITED TO NON-
INFRINGEMENT OF ANY COPYRIGHT, PATENT, TRADE
SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY
THIRD PARTY, MARCHANTABILITY, OR FITNESS FOR ANY
PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY
GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,
INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES
FOR LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM
THE USE OF OR INABILITY TO USE PRODUCT EVEN IF
FUJIFILM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
8. No export.
You acknowledge that neither Software nor any part thereof, will be
transferred, or exported to any country or used in any manner in
violation of any export control laws and regulations to which
Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof,
FUJIFILM may immediately terminate this Agreement without any
notice.
10. Term.
This Agreement is effective until the date when you cease to use
Software, unless earlier terminated in accordance with Section 9
hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your
own responsibility and expense, delete or destroy immediately all
Software (including its copies), Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance
with laws of Japan.
Do not attempt to play the CD-ROM enclosed
with this product on an audio CD player.
Doing so could damage your hearing or
could damage your speakers or headphones.
Please note that this Guide is written on the assumption that you
already have a basic understanding of how to use your PC
(personal computer), Windows and Macintosh.
For basic information on using your PC, Windows and Macintosh,
refer to the respective manuals supplied with your PC.
• Microsoft and Windows are trademarks of the Microsoft
Corporation of the U.S. registered in the U.S. and other
countries. Windows is an abbreviated term referring to the
Microsoft Windows Operating System.
• Macintosh, iMac and Mac OS are registered trademarks of
Apple Computer, Inc.
• QuickTime and the QuickTime logo are trademarks used
under license. The QuickTime logo is registered in the U.S.
and other countries.
• Adobe Acrobat
®
Reader™, ActiveShare™ and PhotoDeluxe
are trademarks of Adobe Systems Incorporated of the U.S.
• SmartMedia™ is a trademark of Toshiba Corporation.
• All other company or product names are trademarks or
registered trademarks of the respective companies.
3
Advertisement
Table of Contents
