User's Guide
\N3
V.42, MNP, or buffer (default).
The modem attempts to connect in V.42 error control mode. If
this fails, the modem attempts to connect in MNP mode. If this
fails, it will attempt to connect in MNP mode. If this also fails,
the modem connects in buffer mode and continues operation.
This is also known as V.42/MNP auto reliable mode (same as
&Q5).
\N4
V.42 or disconnect. The modem attempts to connect in V.42
error control mode. If this fails, the modem disconnects.
\N5
V.42. MNP or Buffer (same as \N3).
\N7
V.42. MNP or Buffer (same as \N3).
Result Codes:
n=0,1,2,3,4,5,7
OK
ERROR Otherwise
\Qn
Local flow control selection
\Q0
Disable flow control.
\Q1
XON/XOFF software flow control.
\Q3
CTS/RTS to DTE (default).
Result Codes:
n=0,1,3
OK
ERROR Otherwise
\Vn
Protocol result code
\V0
Disable protocol result code appended to DCE speed.
\V1
Enable protocol result code appended to DCE speed (default).
Result Codes:
n=0,1
OK
ERROR Otherwise
C-12