Toshiba 5000 Series User Manual page 183

User's Guide
&Gn V.22bis guard tone control
This command determines which guard tone, if any, to transmit while
transmitting in the high band (answer mode). This command is only
used in V.22 and V.22bis mode. This option is not used in North
America and is for international use only.
&G0 Guard tone disabled (default).
&G1
Sets guard tone to 550 Hz.
&G2
Sets guard tone to 1800 Hz.
Result Codes:
n=0,1,2
OK
ERROR Otherwise
&Kn Local flow control selection
&K0
Disables flow control.
&K3
Enables CTS/RTS flow control (default).
&K4
Enables XON/XOFF flow control.
Result Codes:
n=0,3,4
OK
ERROR Otherwise
&Pn Select Pulse Dial Make/Break Ratio
&P0 Selects 39% - 61% make/break ratio at 10 pulses per second.
&P1
Selects 33% - 67% make/break ratio at 10 pulses per second.
&P2
Selects 33% - 67% make/break ratio at 20 pulses per second.
Result Codes:
n=0 to 2
OK
ERROR Otherwise
&V Display Current Configuration
This command displays the current configuration of the modem. If
nonvolatile memory is supported the stored pro-files are displayed as
well.
&V Displays pro-files
C-10