Fn Sticky Key - Toshiba 5000 Series User Manual

User's Manual
Display Brightness: Pressing Fn + F7 increases the display brightness in
increments. When you press these hotkeys, the current setting will be displayed for
two seconds by a pop-up icon. You can also change this setting through the
Monitor brightness item of the Power Save Mode window in Power Saver.
Wireless setting: Press Fn + F8 to select either Bluetooth or wireless LAN
functions or to turn off wireless communication. When you press these hotkeys, a
dialog box will appear. Continue holding down Fn and press F8 to change the
setting. If wireless communication is turned off, Disabled Wireless Com-
munication Switch will be displayed.
NOTE: If no wireless communication device is installed, the dialog box
will not appear.

Fn Sticky key

You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is,
you can press it once, release it, and they press an "F number" key. To start the
TOSHIBA Accessibility Utility, click start, point to All Programs, point to
TOSHIBA Utilities and click Accessibility.
5-6